Featured Products
-
Meokon Factory Price OLED Visible Display Window Intergrated Flow Temperature Sensor
MD-FS210 series heat flow switch adopts heat diffusion principle. There are two temperature sensors in the probe: one is used as a reference sensor to measure the temperature of the medium, and the other is used as a measurement sensor after being heated. The temperature difference between the two sensors is used as the basis for measuring the flow velocity. When the flow velocity of the medium increases, the temperature difference decreases, and vice versa. The temperature difference value is converted into standard electrical signal and displayed after processing. The FS210 series are all designed with all-metal shell, with 8-bit LED showing flow trend and switching status. One product is suitable for various pipe diameters. It can be set by keyboard or computer. No moving parts, maintenance-free, can be used in a variety of media.
- wide range – through the button switch point or defined range More parameters can also be set by handheld Settings or computer -8 LEDS show flow trend and on/off status -PNP/NPN/ relay electrical output optional – Easy to operate inductive button setting – Protection level IP67 – Small structure diameter 36mm – The outgoing direction can be rotated by 330. -
DIP Switch Temperature Transmitter with Thermowell Transducer
The MD-TB explosion-proof temperature transmitter is a dial switch intelligent temperature transmitter, Built-in imported PT100 high-precision temperature sensor, equipped with digital DIP switch intelligent temperature transmitter circuit board, input and output isolation design.
-
High Precision 0.05%FS Digital Pressure Gauge MD-S210
Product Description:
55x 55 mm large-size LCD screen.
105mm diameter,304 SS shell
5digits display, main & sub- screen dual screen design
10 units are available: MPa/kPa/psi/BAR/Pa/mBAR/mmHg/mH2O/Torr/Kgf/cm
low power design,3 AA batteries and can lasts up to 3600 hours
Product certificate: CE, Explosion Certificate Exib IICT4 -
Digital Remote 10 inch DN250 Electromagnetic Chilled Water Flow Meter Electromagnetic Flow Meter
1.No moving parts, no wear
2.The measurement range of the process is 1:100 none
3.Clarifying section or flow reinforcing device
4.Used to measure the flow rate of various conductive liquids
5.The measurement results are not affected by physical properties such as temperature, pressure, viscosity and density
6.Strong corrosion and wear resistance
7.Forward/reverse flow can be measured
8.Large LCD screen, user-friendly operation interface, easy to use
9.Persistent EEPROM, used to store configuration parameters and measurement data in case of power failure
10.Wide operating voltage range
11.Self diagnosis -
Digital Thermometer Manufacturers
Low power consumption, battery power supply, long battery life Probe length and temperature range are optional
battery powered or externally powered 5 digits LCD
High temperature accuracy
SS 304 housing case, strong and sturdy
Support customer on-site temperature calibration Adjustable measurement response speed
Automatic record maximum and minimum value
-
China Remote Digital Thermometer Temperature Manufacturers MD-T560A Meokon
Low power consumption, battery power supply, long battery life Probe length and temperature range are optional
battery powered or externally powered 5 digits LCD
High temperature accuracy
SS 304 housing case, strong and sturdy
Support customer on-site temperature calibration Adjustable measurement response speed
Automatic record maximum and minimum value
-
MD-EL Electromagnetic Flowmeters Manufacturers Meokon
The electromagnetic flowmeter is suitable for measuring almost all electrically conductive liquids, as well as the flow measurement of mud, paste and mud. The premise is that the measured medium must have at least some minimum conductivity. Temperature, pressure, viscosity and density have no effect on the measurement results.
It can also be used to measure corrosive media as long as the proper pipe lining material and electrode material are selected. Solid particles in the medium will not affect the measurement results.
The flow sensor and the intelligent converter form a complete flow meter integrally or separately.
-
High Quality Hydraulic Pressure Transmitters
*Anti-frequency interference design, particularly suitable for use with inverters and variable frequency pumps
*Good long-term stability and high accuracy
*Diffused silicon sensor is used as pressure sensitive element with high sensitivity
*304 stainless steel, Horseman connector
-
Meokon Hydraulic Pressure Gauge Comparator For Pressure Calibration
Change Units:BAR, PSI ,MPa, Kgf/cm2;
Pressure Range: -15 PSI to +15 PSI
Backlight / Connection: NPT1/4 male
Accuracy: 0.5%FS
Input Voltage: 3V (2 AAA batteries)
-
High Accuracy Digital Pressure Gauge 0.05%FS 0.2%FS 0.4%FS
Change Units:BAR, PSI ,MPa, Kgf/cm2;
Pressure Range: -15 PSI to +15 PSI
Backlight / Connection: NPT1/4 male
Accuracy: 0.5%FS
Input Voltage: 3V (2 AAA batteries)
-
Intelligent Digital Temperature Pressure Gauge MD-T200 Thermometer
Low power consumption, battery power supply, long battery life Probe length and temperature range are optional
battery powered or externally powered 5 digits LCD
High temperature accuracy
SS 304 housing case, strong and sturdy
Support customer on-site temperature calibration Adjustable measurement response speed
Automatic record maximum and minimum value
-
MD-S560 Digital Pressure Gauge with Remote Function 4-20mA /RS485
4 digital showing the pressure in real time Rs485 signal
Good stability, anti electromagnetic interference design
Varied pressure units available, error clearing and zero clearing
Wide operation temperature range, wide application areas