banner

FLOW SERIES

  • MD-S975  Gas Flow Switch /Monitor A/R Used in kiln industry

    MD-S975 Gas Flow Switch /Monitor A/R Used in k...

    • Dial rotates 270° horizontally
    • Thermal conduction principle works
    • Supports quick selection of monitoring media
    • Provide digital interfaces and communication protocols
    • Provides a variety of rated flow range options
    • 3-digit digital tube display, easy to read measurement results
  • MEOKON Flange Turbine Flow Meter MD-S451L

    MEOKON Flange Turbine Flow Meter MD-S451L

    Water turbine flow meter for clean water is a speed meter with the advantages of high accuracy, good repeatability, simple structure, low pressure loss and convenient maintenance.

    It is an economic flow solution offering outstanding accuracy with a bearing construction which gives highly reliable performance over long periods.

  • Meokon Temp&pressure Compensated Vortex Flow Meter MD-S451T

    Meokon Temp&pressure Compensated Vortex Fl...

    ◆ High measurement accuracy and wide measuring range;

    ◆ A wide range of measuring media, liquid, gas and steam can be measured;

    ◆ The working temperature is high, and the medium temperature can reach 350 degrees;

    ◆ No moving parts, no wear, high reliability;

    ◆ The sensor is made of stainless steel, which is corrosion-resistant.

  • MD-S462 Pipe segment ultrasonic flow meter

    MD-S462 Pipe segment ultrasonic flow meter

    Wide voltage power supply, 12~28V power supply

    Using the principle of ultrasonic time difference, the accuracy can reach 1%.

    It has strong anti-interference ability and works stably and reliably.

    Can measure forward/reverse flow.

    Large LCD screen, user-friendly operation interface, easy to use

    The measurement results are not affected by physical properties such as temperature, pressure, viscosity and density.

  • MD-EL Electromagnetic Flowmeter

    MD-EL Electromagnetic Flowmeter

    The electromagnetic flowmeter is suitable for measuring almost all electrically conductive liquids, as well as the flow measurement of mud, paste and mud. The premise is that the measured medium must have at least some minimum conductivity. Temperature, pressure, viscosity and density have no effect on the measurement results.

    It can also be used to measure corrosive media as long as the proper pipe lining material and electrode material are selected. Solid particles in the medium will not affect the measurement results.

    The flow sensor and the intelligent converter form a complete flow meter integrally or separately.

     

  • MD-S461 Clamp on Ultrasonic Flow Meter

    MD-S461 Clamp on Ultrasonic Flow Meter

    Wide voltage power supply, 12~28V power supply

    Using the principle of ultrasonic time difference, the accuracy can reach 1%

    Strong anti-interference ability, stable and reliable operation

    Can measure forward/reverse flow

    Large LCD screen, user-friendly operation interface, easy to use

    Long-term measurement results are not affected by physical properties such as temperature, pressure, viscosity, and density. The components are designed according to high protection level standards and can be used in harsh working environments.

  • Wall Mounted  Split-type Electromagnetic Flowmeter MD-EL

    Wall Mounted Split-type Electromagnetic Flowme...

    1.No moving parts, no wear
    2.The measurement range of the process is 1:100 none
    3.Clarifying section or flow reinforcing device
    4.Used to measure the flow rate of various conductive liquids
    5.The measurement results are not affected by physical properties such as temperature, pressure, viscosity and density
    6.Strong corrosion and wear resistance
    7.Forward/reverse flow can be measured
    8.Large LCD screen, user-friendly operation interface, easy to use
    9.Persistent EEPROM, used to store configuration parameters and measurement data in case of power failure
    10.Wide operating voltage range
    11.Self diagnosis

     

  • Gas Mass Flowmeter with High Precision

    Gas Mass Flowmeter with High Precision

    MD-FM340 gas mass flow sensor is made of micro-electro-mechanical system (MEMS) flow sensing chips. It is suitable for a wide range of clean and relatively dry gas flow measurement and process control. Unique packaging technology enables the product to meet a wide range of flow measurement, ensuring high sensitivity, high reliability, high stability and low cost. The FM340 is based on MEMS flow sensing unit and high precision digital processing and calibration circuit (MCU). The integrated DELta-sigma A/D converter and the logic circuit with internal calibration function and MCU processor ensure that the sensor signal is collected effectively in real time to obtain accurate flow signal, and the corresponding compensation algorithm is processed internally, so that no external calibration compensation is required to ensure high precision flow output. Friendly digital output communication form, users can be very convenient to get the corresponding data information for communication; The product application scope is very broad.

  • Manufacturer′s High-Precision Gear Meter High-Pressure Resistant 45MPa Resin and Glue Measurement Pulse Output Analog Output

    Manufacturer′s High-Precision Gear Meter High-P...

    The MD-FM500 gear flow sensor is built with double gears, which can calculate the volume of medium through the volume of high precision gear wheel and measure the fluid medium with small size. It is a new type of volumetric flow sensor, which is used to measure the flow or instantaneous flow of liquid in a pipe precisely continuously or intermittently. – analog switch double output -pnp /NPN switch arbitrarily -LED liquid crystal display – high pressure (1.0-45mpa) – high and low temperature resistance (-40ºC-150ºC) – various viscous media can be measured – high precision and repeatability – range specific width (1:100) – wide measurement range – strong anti-corrosion and anti-pollution ability (acid and alkali) arbitrary setting

  • Meokon 24V Stainless Steel Pump Electronic Flow Switch

    Meokon 24V Stainless Steel Pump Electronic Flow...

    Based on the thermal principle, the enclosed probe contains two resistors, one of which is heated as the detection resistance and the other is not heated as the reference resistance. When the medium flows, the heat on the heating resistance is taken away, the resistance value is changed, and the difference between the two resistances is used as the basis for judging the flow rate.

  • Meokon Manufacturer Thermal Principle Multi-Purpose Electronic Flow Switch for Air and Liquid

    Meokon Manufacturer Thermal Principle Multi-Pur...

    Based on the thermal principle, the enclosed probe contains two resistors, one of which is heated as the detection resistance and the other is not heated as the reference resistance. When the medium flows, the heat on the heating resistance is taken away, the resistance value is changed, and the difference between the two resistances is used as the basis for judging the flow rate.

  • Meokon Explosion-Proof Grade of Hydraulic System Ex D Ll CT6 Electronic Flow Switch

    Meokon Explosion-Proof Grade of Hydraulic Syste...

    Based on the thermal principle, the sealed probe contains two resistors, one of which is heated as the detection resistance and the other is not heated as the reference resistance. When the medium flows, the heat on the heating resistance is taken away and the resistance value is changed. No moving parts, maintenance-free, easy to install, one type is suitable for a variety of pipe diameter requirements, switch volume continuously ad justable, very low pressure loss, compact structure, LED display flow trend and switch status.