banner

SENSOR

  • smart pressure transmitter differential pressure transducer Metal Capacitive Pressure Sensor

    smart pressure transmitter differential pressur...

    The medium pressure is transferred to the test diaphragm in the middle of δ room by the barrier diaphragm and Silicon oil, as the test diaphragm is tight flexible element, it produce displacement following the pressure differential. The displacement of the diaphragm and pressure differential are in direction proportion, the max displacement is 0.1mm, It is tested by the by the capacitive plat on the both side, Then the differential capacitor between the test diaphragm and capacitive board switched to standard output by the Circuit Current.

  • 0~20BAR 5V 0-20 Bar piezoresistive ceramic micro pressure sensor

    0~20BAR 5V 0-20 Bar piezoresistive ceramic micr...

    Product name:     ceramic pressure sensor

    pressure range:   0-20bar

    dimension:    diameter φ18, height is upon pressure range

    excitation:     2.5…30Vdc,max

    bridge impedance:      11KΩ±30%

    full scale output:  3mV/V,type

    operation temperature:      -40~135℃

  • Meokon Building Water Supply Pressure Water Sensor transducer modules

    Meokon Building Water Supply Pressure Water Sen...

    Low cost, small size, easy to install
    Range width: minimum-3~3KPa, maximum0~1.6MPa
    The comprehensive accuracy of 0~85ºC up to 1.5%FS
    Storage temperature-20~120 ºC, working temperature 0~100 ºC
  • Meokon Ceramic Resistance Sensor Urea Pressure Sensor transducer modules

    Meokon Ceramic Resistance Sensor Urea Pressure ...

    Maximum 1.5% error in the range of 0~85ºC
    Temperature compensation range -40~125ºClOperation voltage: 5±0.25V
    High voltage 10V protection, reverse connection protection
    High reliability, low drift
  • Meokon Industrial Platinum Thermistors Temperature Sensors

    Meokon Industrial Platinum Thermistors Temperat...

    Small size, easy to install

    The sensor is in contact with the measured medium, with high reliability

    The material of the part in contact with the medium is corrosion-resistant