PRESSURE TEST PUMP CALIBRATION
-
Handheld Hydraulic Pressure Pump Calibrator 0-6...
Output pressure : 0~69 MPa
Working temperature :
Temperature : 0~40℃
Relative humidity:≦100%
Weight: 2.0KG
Output port thread : M20*1.5 internal thread
High pressure hose connector thread : M20*1.5 internal thread -
MK-S501 Hand Pneumatic Hand Pump 0-7bar
The handheld air pressure pump MK-S501 is a gas type air pressure pump used in conjunction with the digital standard meter. Suitable for calibrating instruments installed on site in industrial processes and various pressure instruments used in control rooms, it can also provide a pressure source for calibration. Various pressure transmitters, sensors, and instruments within a range of 7bar can be calibrated using this handheld pressure pump.
-
MK-PC104 0-700bar Portable Pressure Calibratio...
Pressure measuring medium: purified water or special oil (one of two)
Service temperature: 0 ~ 50 ºC
Overall dimension: 3 2 5 × 2 0 0 × 1 8 0
Instrument weight: 4.5 kg
Pressure range: 0 ~10/ 20/30/40/60/100 MPa(Each gear) -
MK-PC101 Hydraulic Pressure Test Pump 0-700bar
Hydraulic Pressure Test Pump
Media: Mineral oil or deionized water.
Generated Pressure Range:0-700bar
Connection:Hand-tight connectors for both test gauge and reference gauge.M20X1.5 female -
MK-PC103 Portable Pneumatic Pressure Test / Cal...
- Pressure measuring medium: Clean air (clean and non corrosive gas)
- Service temperature: 0 ~ 50 ºC
- Overall dimension: 305×210×180
- Instrument weight: 3.58kg
- Pressure range: -0.95-100bar
-
MK-PC102 Hydraulic comparison test pump
Pressure measuring medium: water and oil
pure water or special oil (choose one of two) Use temperature: 0 ~ 50 ºC
Dimensions: 375x290x205 (length × width × height)
Instrument weight: 5.24 kg
Pressure range: 0 ~ 1 0 / 1 6 / 2 5 / 4 0 / 6 0MPa -
MK-PC106 Hydraulic pressure comparators /pump/ ...
pressure range: 0-60MPa (each gear)
pressure medium: purified water
adjustment sensitivity: Min 1kPa
overall dimension: 420x385x20 (L × w × h)
weight: 7.22kg -
MK-PC105 Pneumatic Pressure Test Pump -0.95～16...
- Pneumatic Pressure Test Pump
- Range: -0.95～160bar
- Stability: 0.025%
- Pressure interface: M20 × 1.5 (two pressure output interfaces)
- Occurring pressure: -95kpa-2.5Mpa,-95kpa-4Mpa,-95kpa-6Mpa,-95kpa~8MPa,-95kpa~10MPa,-95kpa~12 MPa,-95kpa~14MPa,-95kpa～16）MPa