Handheld Hydraulic Pressure Pump Calibrator 0-690bar
The hydraulic hand pump MK-S506 is a hydraulic hand-held pump that is used in conjunction with the DPG210 digital pressure gauge. It is used to verify the pressure measuring instruments installed on site and various pressure instruments used in the control room. It can also provide a pressure source for the factory calibration of pressure measuring instruments. . All kinds of pressure transmitters, pressure sensors and all kinds of pressure gauges within 69MPa can be used for manual pressure pump calibration.
The hand-held pressure pump is portable, light in weight, light in pressure and easy to use. The pressure fine-tuning handle is designed in structure, and the output pressure can be easily changed by rotating the fine-tuning handle. In addition, there is a high-pressure hose connection to be calibrated meter, output port connection standard meter. The hand-held pressure pump can be carried to the site and directly connected with the instrument to be calibrated, and the calibration is quick and simple.
The hydraulic hand pump is composed of a pressure rod, fine adjustment, high pressure hose, pressure relief valve, oil cup, output port, etc. Hold the handle of the pressure pump with your hands, firmly grasp and relax repeatedly to drive the piston rod to reciprocate. When the pressure reaches about 10MPa, use fine-tuning to suppress. Several reciprocating movements can produce an output pressure of 69MPa.
Precautions for use:
- Before using the pressure pump, unscrew the breather, fill it with a proper amount of oil (such as 1/2 cylinder of special oil), then tighten the breather, hold it firmly, loosen the handle, and drive out the gas in the cylinder for use.
- During the calibration process, attention should be paid to keeping all connections sealed. After calibration, the pressure relief valve must be rotated to release the pressure before disassembling the instrument, otherwise the instrument may be damaged.
