Good Quality Flowmeter - MD-EL Electromagnetic Flowmeter – MEOKON
Good Quality Flowmeter - MD-EL Electromagnetic Flowmeter – MEOKON Detail:
Application:
Clean water &sewage Electricity production &distribution Chemical & industrial pharmacy Food industry
Technical characteristics:
1. No moving parts and no wear
2. The measurement range of the process is 1: 100
3. No clear section or flow enhancement device
4. Measuring the flow rate of various conductive liquids
5. Measurement results are not affected by physical properties such as temperature, pressure, viscosity, and density
6. Strong corrosion resistance and wear resistance
7. Measures forward / reverse flow
8. Large LCD screen, user-friendly operation interface, easy to use
9. Persistent EEPROM for saving configuration parameters and measurement data during power failure
10. Wide operation voltage range
11. Self-diagnosis
Technical Parameters:
| Display | LCD display, display various flow data in real-time, m³ or L display unit | ||
| Structure | Embedded type design, integrated or split type | ||
| Measuring medium | Liquid or solid-liquid, Conductivity> 0.5μs / cm2 | ||
| Measuring Range | 0.05m/s~8m/s | ||
| Measurement Accuracy | Diameter mm | Range m/s | Accuracy |
|
3~20 |
0.3 or less | ±0.25%FS | |
| 0.3~1 | ±1.0%R | ||
| 1~10 | ±0.5%R | ||
|
25~600 |
0.1~0.3 | ±0.25%FS | |
| 0.3~1 | ±0.5%R | ||
| 1~10 | ±0.3%R | ||
|
700~3000 |
0.3 or less | ±0.25%FS | |
| 0.3~1 | ±1.0%R | ||
| 1~10 | ±0.5%R | ||
| %FS: relative range, %R: relative measurement | |||
| Caliber(mm) | 6mm~2000mm | ||
| Nominal pressure | PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN420 etc. | ||
| Output | 4~20mA or frequency (<5KHz), RS485, wireless transmission (optional), relay (optional) | ||
| Connection | DN6 ~ DN2000 for flange connection | ||
| Connection standard | Applicable to various pipe flange standards | ||
| Product Standards | Accuracy requirements meet JJG 1033-2007 standard | ||
| IP rating | IP65(integrated), IP67 or IP68 when split (optional) | ||
| Power supply | AC86~220V | ||
| Ambient temperature | 5~55℃ | ||
| Environment humidity | <85%r.h(Non-condensing) | ||
Product detail pictures:
Related Product Guide:
Good quality To start with,and Purchaser Supreme is our guideline to offer the top service to our customers.Presently, we've been seeking our best to be amongst the top exporters inside our industry to fulfill consumers extra need to have for Good Quality Flowmeter - MD-EL Electromagnetic Flowmeter – MEOKON , The product will supply to all over the world, such as: Istanbul, South Korea, South Korea, In order to make more people know our products and to enlarge our market, we have devoted a lot of attention to technical innovations and improvement, as well as replacement of equipment. Last but not the least, we also pay more attention to training our managerial personnel, technicians and workers in planned way.
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
Write your message here and send it to us




