2021 High quality Water Flowmeters - Meokon Factory Price OLED Visible Display Window Intergrated Flow Temperature Sensor – MEOKON

Application:

- Hydraulic/lubrication
- Pump – Cooling system
- Ventilation system
- water treatment
- Leak detection
Technical Parameters:
1.Measuring range
Water: 1… 150cm/s (the default display value is demarcated in
water and specified in other media)
Oil: 3… 300cm/s
Air: 20… 2000cm/s
2.Measuring medium: water, oil, gas and other compatible stainless steel medium
3.repetitive:1%@<0.6m/s;3%@1.5m/s
4.pressure:100bar(300bar optional)
5.Initialization time:1…8s
6.Response time: Typical value2s
7.power supply voltage:18-30Vdc
8.No load current consumption:≤40mA,24Vdc
9.Switch output (normally open + normally closed)
Output type: PNP/NPN/ relay optional/normally on/normally off can be set
Load capacity: 500mA at 24Vdc power supply (NPN and PNP type)
60W (relay type)
10.Wiring protection: Reverse phase, overload, short circuit protection
11.Display:
Design: 3 red leds (flow rate switching point)
12.Temperature:
Working/storage temperature: -40… 85 ºC
Medium temperature: -20… 85 ºC (- 30… 120 ºC)
13.material
Case: 304 stainless steel
Probe: stainless steel 304/ stainless steel 306L
14.Protection level: IP67
15.Appearance: M12*1 connector